LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 540 (Wiring Systems - Specifications, Component Views And Connector End Views) >> Diagnostic Information and Procedures >> Micro-Pack 100W Connectors >> Terminal Repair Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Terminal Repair Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Use the appropriate wire assembly kit available through Saturn Service Parts.

  1. Slide the new terminal into the correct cavity at the back of the connector.
  2. Push the terminal into the connector until it locks into place. The new terminal should be even with the other terminals. Insure that the terminal is locked in place by gently pulling on the wire.
  3. Replace the nose piece.
  4. Replace the dress cover.
scientia non olet · About LEMON Manuals