Rear View Camera Replacement (Liftgate)

Fig 1: View Of Rear Object Camera & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the rear liftgate applique. Refer to Liftgate Center Applique Replacement (Escalade) or Liftgate Center Applique Replacement (Tahoe, Yukon) .
1	Rear Object Camera Screws Tighten: 2 N.m (18 lb in)
2	Rear Object Camera Tip: Disconnect the electrical connector.