Circuit/System Testing
- Center the balance and fade adjustment on the radio.
- If adjustment of the fade and balance eliminates the concern, review the operation of the radio with the customer.
- Verify that the wireless headphones are set to the proper channel and are working properly.
- Disconnect the C2 connector of the rear HVAC control module. Connect a DMM between the suspect speaker output circuits (input to the RSA) from the radio. Turn ON the radio and verify there is AC voltage present.
- Test or repair open, short to ground or short to voltage on the RSA ground circuit and battery positive voltage circuit.
- If all circuits test normal, replace the rear HVAC control module.