Test Description
The number below refers to the step number on the diagnostic table.
- 2: This step tests if the IPC is able to illuminate the ABS indicator, during the bulb check.
ABS Indicator Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 |
|
Go to Diagnostic Aids | Go to Step 3 |
| 3 | Replace the instrument panel cluster (IPC). Refer to Control Module References
for replacement, setup, and programming. Did you complete the replacement? |
Go to Step 4 | - |
| 4 |
|
System OK | Go to Step 3 |