LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> Stability System Caution Indicator Inoperative >> Test Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Description

The number below refers to the step number on the diagnostic table.

  1. 2:  This step tests if the IPC is able to illuminate the stability system caution indicator during the bulb check.
Stability System Caution Indicator Inoperative

Step Action Yes No
1 Did you perform the Diagnostic System Check - Vehicle? Go to Step 2  Go to Diagnostic System Check - Vehicle
2 
  1. Turn OFF the ignition for 5 seconds.
  2. Turn ON the ignition while observing the stability system caution indicator.
Does the stability system caution indicator illuminate?		 Go to Diagnostic Aids Go to Step 3 
3 Replace the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement (Cadillac) or Instrument Cluster Replacement (Except Cadillac) .
Did you complete the replacement?		 Go to Step 4  -
4
  1. Turn OFF the ignition for 5 seconds.
  2. Turn ON the ignition while observing the stability system caution indicator.
Does the stability system caution indicator illuminate?		 System OK Go to Step 3 
scientia non olet · About LEMON Manuals