Circuit/System Verification
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON. Verify that no generator or battery current sensor DTCs are set that would cause a charging system concern.
- If DTCs are set, go to Diagnostic Trouble Code (DTC) List - Vehicle .
- Ignition OFF, measure the voltage across the battery terminals. The voltage should read 12.0 volts or greater at room temperature.
- If not within the specified value, charge and test the battery before testing the charging system. Refer to Battery Inspection/Test .
- Go to Circuit/System Testing.