Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor (1) to the steering knuckle.

NOTE: Refer to Fastener Notice .

Fig 2: Wheel Speed Sensor Bolt

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor bolt (1).
Tighten: Tighten the bolt to 9 N.m (80 lb in).

Fig 3: View of Wheel Speed Sensor Wire Harness Clip

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor wire harness clip (1) to the steering knuckle.

Fig 4: Wheel Speed Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the wheel speed sensor electrical connector (1).
Install the wheel speed sensor wire harness clips (2) to the stabilizer bar bracket.
Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .