Circuit/System Verification

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, verify that none of the Memory Seat Module Lumbar Switch parameters are Active while the switch is in an inactive state.
- If either of the switch parameters is Active, refer to Lumbar Adjuster Switch Circuit Test .
Observe the scan tool Lumbar Switch parameters while pressing the related lumbar switch. The reading should change between Inactive and Active.
- If not the specified value, refer to Lumbar Adjuster Switch Circuit Test .
If the lumbar switch inputs to the MSM function normal, refer to Motor Control Circuit Test .