Circuit/System Testing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Dual DVD Rear Seat Entertainment Audio Inoperative
- Turn ON the ignition, tune the radio to station 88.3, 88.7, 89.1, 89.5, 89.9, or 90.3MHz. Chose the station that has the least amount of regular audible radio reception.
- Press the power button on the headrest DVD displays. Insert a DVD and operate the DVD player in play mode. Verify the DVD audio can not received on one of the above stations.
- If the DVD audio can be heard review the system operation with the customer.
- Verify the DVD player is in play mode.
- At the DVD control module, test for AC voltage between terminal 6 and terminal 3 or 4 with a DMM at the back of the black or red connector.
- If AC voltage is present replace the DVD control module.
- Turn the DVD player off and disconnect both connectors from the DVD display that was playing the DVD.
- Swap the two connectors on the display and swap the two corresponding connectors at the DVD control module. Verify the DVD audio now operates normally.
- If the DVD audio now operates normally, replace the DVD display harness.
- It the DVD audio is still inoperative replace the suspect DVD display.
Dual DVD Rear Seat Entertainment Audio Distorted
- Turn ON the ignition, tune the radio to station 88.3, 88.7, 89.1, 89.5, 89.9, or 90.3MHz. Chose the station that has the least amount of regular audible radio reception.
- Press the power button on the headrest DVD displays. Insert a DVD and operate the DVD player in play mode. Verify the DVD audio is distorted on one of the above stations.
- If the DVD audio can be heard review the system operation with the customer.
- Turn the DVD player off and disconnect both connectors from the DVD display that was playing the DVD.
- Swap the two connectors on the display and swap the two corresponding connectors at the DVD control module. Verify the DVD audio now operates normally.
- If the DVD audio now operates normally, replace the DVD display harness.
- If the DVD audio distortion persists, replace the DVD control module.