Remote Control Door Lock Receiver Replacement (Except Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Remote Control Door Lock Receiver (Except Avalanche/Escalade EXT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the back rear corner upper garnish molding. Refer to Body Rear Corner Garnish Molding Replacement - Left Side (w/E61) or Body Rear Corner Garnish Molding Replacement - Left Side (w/o E61) .
1	Remote Control Start Antenna Assembly Tip: Disconnect the electrical connector.
2	Remote Control Door Lock Receiver Tip: The module slides and snaps into the body structure. Disconnect the electrical connector. If a replacement module is installed, program the module. Refer to Control Module References .