LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1317 (Rear Suspension System) >> Repair Instructions >> Coil Spring Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Coil Spring & Upper Insulator
    GM625136Courtesy of GENERAL MOTORS CORP.
  1. Install the coil spring and the upper insulator.
  2. Raise the rear axle.
  3. Install the lower shock absorber retaining nut and bolt to the rear axle. Refer to Shock Absorber Disposal .
  4. Install the stabilizer shaft link to the frame. Refer to Stabilizer Shaft Link Replacement .
  5. Connect the ESC sensor, if equipped. Refer to Electronic Suspension Rear Position Sensor Link Assembly Replacement .
  6. Remove the rear axle support.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals