Front Door Switch Backlighting Circuit Test
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector X4 at the door lock and side window switch.
- Connect a 3A fused jumper wire between the low reference circuit terminal 4 and ground.
- Connect a test lamp between the backlight supply voltage circuit terminal 13 and B+. The heated seat switch backlighting should illuminate.
- If the switch backlighting does not illuminate, replace the heated seat switch.
- If the switch backlighting tests normal, replace the door lock and side window switch.