LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1353 (Data Communication System) >> Diagnostic Information and Procedures >> DTC U2105-U2199 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector of the yaw and lateral accelerometer sensor.
  2. Ignition OFF, test for less than 5 Ω between the sensor ground circuit and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance. If the circuit tests normal, replace the EBCM.
  3. Ignition ON, verify that a test lamp illuminates between the sensor B+ circuit and ground.
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the EBCM.
  4. Test the serial data circuits for an short to ground, open/high resistance, or short to voltage. If all circuits test normal, replace the yaw and lateral accelerometer sensor.
scientia non olet · About LEMON Manuals