LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1384 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Ball Joint Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Use the outer flange of the ball joint in order to press the ball joint into place.
  1. Install the ball joint using a press.
  2. Place the lower control arm a bench vise.
    3. NOTE: Use the replaced ball joint as a reference.
  3. Using a punch, install the crimps to the ball joint.
  4. Install the lower control arm in the vehicle. Refer to Lower Control Arm Replacement (2500, 3500) , Lower Control Arm Replacement (2500)  or Lower Control Arm Replacement (1500) 
  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  6. Remove the safety stand and lower the vehicle.
  7. Verify the wheel alignment. Refer to Wheel Alignment Specifications .
scientia non olet · About LEMON Manuals