Circuit Description
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For terminal and circuit identification, see WIRING DIAGRAMS
.
The electronic ignition system uses an individual ignition coil for each cylinder. The Powertrain Control Module (PCM) controls the ignition operation through eight individual Ignition Control (IC) circuits. Each bank of four ignition coils is connected to the PCM, power, or ground by the following circuits
- Low reference
- Chassis ground
- Ignition 1 voltage
- The appropriate IC circuit
The PCM triggers an ignition coil by grounding the appropriate IC circuit using information from the Crankshaft Position (CKP) and Camshaft Position (CMP) sensors.