Component Testing
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the stop lamp switch.
- With the brake pedal released, test for infinite resistance between terminal A and terminal B stop lamp switch.
- If not the specified value, replace the stop lamp switch.
- With the brake pedal released, test for less than 1.0 ohm between terminal C and terminal D at the stop lamp switch.
- If not the specified value, replace the stop lamp switch.
- With the brake pedal applied, test for less than 1.0 ohm between terminal A and terminal B at the stop lamp switch.
- If not the specified value, replace the stop lamp switch.
- With the brake pedal applied, test for infinite resistance between terminal C and terminal D at the stop lamp switch.
- If not the specified value, replace the stop lamp switch.