Circuit/System Testing
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the appropriate harness connector at each component fed by the inadvertent power courtesy lamp control circuit.
- Ignition ON, verify that a test lamp illuminates between the courtesy lamp control circuit at each component harness connector and ground.
- If the test lamp does not illuminate, test the inadvertent power courtesy lamp control circuit for a short to ground or an open/high resistance. If the circuits test normal, replace the BCM.
- Connect each component one at a time and verify with a scan tool if the DTC resets as current.
- If the DTC resets, test or replace the inoperative component.