USB Receptacle Replacement (Without SLT)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: USB Receptacle (Without SLT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (with RPO SLT) or Instrument Panel Accessory Trim Plate Replacement (without RPO SLT)
1	USB Receptacle Procedure Disconnect the electrical connector. Release the tabs and gently remove the receptacle by pushing forward from the trim plate.

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (with RPO SLT) or Instrument Panel Accessory Trim Plate Replacement (without RPO SLT)

USB Receptacle

Procedure

Disconnect the electrical connector.
Release the tabs and gently remove the receptacle by pushing forward from the trim plate.