Circuit/System Verification
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- With a scan tool, clear DTC C0550. The DTC should clear.
- If the DTC will not clear, replace the control module.
- Ignition OFF, remove the scan tool, open and close the drivers door.
- Wait 60 seconds, ignition ON, then recheck for DTCs. DTC C0550 should not set.
- If DTC C0550 sets, replace the module.