Power Window System Controls (RPO A31 W/O AN3, DL3)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The power window system will operate anytime the RAP system is active or when the ignition switch is in the ACCY or ON position.

The driver and passenger door lock and side window switches are integrated control assemblies. The driver and front passenger window switches are normally open, 3 position rocker type switches, with detents for Up, Down, and Express Down. The driver window master control rear passenger window switches are normally open, 2 position rocker type switches, with detents for Up and Down. The driver window master control rear window lockout switch is a push button type switch that provides an active signal to the driver window switch whenever pressed. Whenever the rear window lockout switch is pressed the driver window switch will enable or disable the function of the rear window switches depending on the current state, and illuminate the switch indicator whenever the function is active. (No scan tool support for this system)