Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of APP Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

CAUTION: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.

Remove the knee bolster. Refer to Knee Bolster Replacement (With SLT) or Knee Bolster Replacement (Without SLT) .
Push down the small tab and disconnect the accelerator pedal position (APP) sensor electrical connector (1).

Fig 2: View Of Accelerator Pedal Position Sensor Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the accelerator pedal bolts.
Remove the accelerator pedal.