LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1614 (Engine Control System & Fuel System - 4.3L - Repair Instructions) >> Repair Instructions >> Spark Plug Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Spark Plug Wire Separators & Boots
    GM1876924Courtesy of GENERAL MOTORS CORP.
  1. Remove the appropriate spark plug wire boot(s) (2) from the spark plug.
    1. Twist the spark plug boot 1/2 turn.
    2. Pull ONLY on the spark plug boot or use a tool designed for this purpose in order to remove the spark plug wire boot from the spark plug.
    2. Fig 2: View Of Spark Plugs
    GM1876950Courtesy of GENERAL MOTORS CORP.
  2. Loosen the spark plug 1 or 2 turns.
  3. Brush or air blast away any dirt from around the spark plug.
  4. Remove the spark plug. If removing more than 1 plug, place each plug in a tray marked with the corresponding cylinder number.
scientia non olet · About LEMON Manuals