Circuit/System Testing
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, verify the scan tool Driver Door Switch Memory Recall Switches parameter is approximately 2.75 V while pressing the memory 1 switch.
- If not the specified value, refer to the Memory Switch component test. If the memory switch tests normal, replace the driver door lock/window switch.
- Verify the scan tool Memory Recall Switches parameter is approximately 1.75 V while pressing the memory 2 switch.
- If not the specified value, test or replace the memory switch.
- Verify the scan tool Memory Recall Switches parameter is approximately 1.0 V while pressing the EXIT switch.
- If not the specified value, test or replace the memory switch.
- If all circuits test normal, replace the MSM.