Rearview Camera Replacement (Endgate)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rearview Camera

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the endgate latch handle bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (Pickup) .
1	Endgate Access Panel Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Endgate Access Panel
3	Rearview Camera Screw (Qty: 3)
4	Rearview Camera Procedure Route the electrical harness through the guide. Disconnect the electrical connector.