Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the jam nut on the inner tie rod (1).
- Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .
- Install the jam nut (1) on the tie rod and tighten to 75 N.m (55 lb ft).
- Check the toe setting after tightening.
- Re-adjust the toe setting if necessary.
CAUTION:
Refer to Fastener Caution .