LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1950 (Wiper System And Washer System) >> Diagnostic Information and Procedures >> DTC B3922 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X3 harness connector at the turn signal multifunction switch.
  2. Ignition ON, verify the scan tool Windshield Wiper Switch parameter is OFF.
    • If not the specified value, test the signal circuit terminal N for a short to ground. If the circuit tests normal, replace the BCM.
  3. If all circuits test normal, test or replace the turn signal multifunction switch.