Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The liftgate control module controls operation of the liftgate latch motor and the liftgate actuator assembly. Under normal conditions the power latch can only be unlatched under power from the liftgate control module through an input from the liftgate handle switch, the interior liftgate control switch, or the remote keyless entry transmitter, but the liftgate may be manually closed to the primary latched position without the liftgate control module performing the power latch function. The ON/OFF switch in the interior liftgate control switch will enable or disable the power open/close operation of the actuator assembly but will have no effect on power latch operation. The liftgate actuator assembly consists of the actuator drive motor with 2 internal Hall effect sensors. The drive motor is mated to a worm type gear off the actuator clutch and when the clutch is engaged the motor rotation is transferred to the clutch gear, intermediate gear, and actuator arm gear. The full open switch is a limit switch mounted on the liftgate actuator assembly along side the actuator arm gear, and will make contact with the cam on the actuator arm gear when the liftgate is near the full open position. The liftgate control module continuously monitors the liftgate location and direction of travel using the 2 Hall effect sensors in the drive motor. The sensor counts are used to determine when the liftgate has reached the open and closed points of travel where the actuator clutch should be disengaged. These positions may vary slightly and must be learned when most liftgate components are serviced.