Endgate Handle Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Endgate Handle Assembly & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the endgate trim panel. Refer to Endgate Trim Panel Replacement . Remove the endgate spoiler. Refer to Rear Spoiler Replacement (Avalanche/Escalade) .
1	Endgate Handle Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft)
2	Endgate Handle Assembly Disconnect the actuator rods. Disconnect the electrical connectors.

Callout

Component Name

Preliminary Procedure

Remove the endgate trim panel. Refer to Endgate Trim Panel Replacement .
Remove the endgate spoiler. Refer to Rear Spoiler Replacement (Avalanche/Escalade) .

Endgate Handle Bolt (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
25 N.m (18 lb ft)

Endgate Handle Assembly

Disconnect the actuator rods.
Disconnect the electrical connectors.