Instrument Cluster Scan Tool Information
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Instrument Panel Cluster Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage | - | Varies | This displays volts. This is the voltage input supplied to the instrument panel cluster. |
| Brake Fluid | - | OK | The scan tool displays OK or Low. This is the state of the brake fluid level. |
| Brake Fluid Switch | - | Varies | This displays volts. This is the voltage status of the brake fluid switch. |
| DIC Fuel Info. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the DIC Fuel Info. switch. |
| DIC Information Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the DIC Information switch. |
| DIC Personalization | - | Off | The scan tool displays Active or Inactive. This is the state of the DIC Personalization switch. |
| Ignition 1 Input | - | Active | The scan tool displays Active or Inactive. This is the state of the Ignition 1 input to the instrument panel cluster. |
| Ignition Cycle Counter | - | Varies | The scan tool displays counts. This is the number of times the ignition has been cycled from the OFF to ON position. |
| Odo/Trip Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the odometer/trip switch. |
| Passenger Seatbelt Indicator Commanded | - | Off | This displays On or Off. This is the commanded state of the passenger seatbelt indicator. |
| Passenger Seatbelt Indicator Status | - | Off | This displays On or Off. This is the state of the passenger seatbelt indicator. |
| Set/Reset Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the set/reset switch. |
| Washer Fluid Level | - | OK | The scan tool displays OK or Low. This is the state of the washer fluid level. |
Instrument Panel Cluster Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Dimming | The IPC dims from 0-100 percent when you select INCREASE or DECREASE by 20 percent increments. |
| Display Test | The instrument panel cluster (IPC) illuminates all of the display segments when you select On. |
| IPC Gauge Sweep Test | The instrument panel cluster (IPC) sweeps all gauges when you select On. |