Tools Required
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
J 35616-200 12-Volt Unpowered Test Lamp
NOTE:
Refer to Test Probe Notice
in Cautions and Notices.
A test lamp can simply and quickly test a low impedance circuit for voltage.
The J 35616-200 is Micro-Pack compatible and comprised of a 12-volt light bulb with an attached pair of leads.
To properly operate this tool use the following procedures.
When testing for voltage:
- Attach 1 lead to ground.
- Touch the other lead to various points along the circuit where voltage should be present.
- When the bulb illuminates, there is voltage at the point being tested.
When testing for ground:
- Attach 1 lead to battery positive voltage.
- Touch the other lead to various points along the circuit where ground should be present.
- When the bulb illuminates, there is ground at the point being tested.