Installation Procedure
WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the regulator to the door.
- Install the bolts to the window regulator.
Tighten: Tighten the bolts to 9 N.m (80 lb in).
- Align the window to the regulator and install the bolts holding the window to the regulator.
Tighten: Tighten the bolts to 9 N.m (80 lb in).
- Connect the wiring harness to the window motor assembly.
- Install the water deflector. Refer to Water Deflector Replacement - Front Door .
- Install the trim panel. Refer to Trim Panel Replacement - Side Front Door .
- Lower the window. Inspect the window operation.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.