Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the cruise control module.
Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement (4.3L Engine) .

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Fig 1: Installing Cruise Control Module Nuts

Courtesy of GENERAL MOTORS CORP.

Install the cruise control module nuts.
Tighten: Tighten the nuts to 9 N.m (80 lb in).
Connect the cruise control module electrical connector.

Fig 2: Connecting Cruise Control Module Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Install the upper fender brace.

Fig 3: Installing Upper Fender Brace
Courtesy of GENERAL MOTORS CORP.
Install the upper fender brace bolts.
Tighten: Tighten the bolts to 9 N.m (80 lb in).