Easy Exit Seat Programming
WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Perform the following actions in order to program the memory seats for 2 separate drivers:
- Press the correct memory seat button for the specific driver. The seat will move to the last stored memory position.
- Move the seat to the desired exit/entry position.
- Press the exit button and hold for 3 seconds. After pressing the switch a double chime should be heard.
- Repeat the steps for the second driver.