LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Power Take-Off System) >> Repair Instructions >> Power Take-Off (PTO) Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the PTO switch to the housing
    Fig 1: Installing PTO Switch Into I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  2. Connect the wire connector to the switch.
  3. Install the switch housing to the I/P till it clicks into place.
  4. Install the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals