Scan Tool Output Controls
WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Tire Pressure Monitor (TPM) Option | TPM Option Enable | After replacing the passenger door module (PDM)/switch assembly, the scan tool must be used to enable the TPM option, refer to Control Module Setup . |
| Tire Type and Tire Pressure | Tire Type/Pressure Selection | After replacing the PDM/switch assembly, the scan tool must be used to select the correct tire type and the front and rear tire pressures for the vehicle being serviced. Refer to Control Module Setup . |
| Spare Tire Monitoring | Spare Tire Monitoring Disable | This special function is used to clear any Id that has been unintentionally learned into the spare tire location. |