LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 910 (Lighting Systems) >> Diagnostic Information and Procedures >> Scan Tool Data List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Data List

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM)

Scan Tool Parameter Data Display Units Displayed Typical Data Value
Operating Conditions: Ignition in the ON position, bright light applied to the ambient light sensor, park brake not set, headlamp switch in the OFF position, dome lamp switch in the OFF position, fog lamp switch in the OFF position, and all doors closed.
Ambient Light Sensor Exterior Lighting Volts Approximately 0.67 Volts
Ambient Light Status Exterior Lighting Night/ Day/ Unknown/ Invalid Day
Auto Hdlp. Disable Sw. Exterior Lighting Inactive/Active Inactive
Backup Lamps Exterior Lighting Off/On Off
Courtesy Lamp PWM Cmd. Interior Lighting Percent 0%
Cruise Ctrl. LED Dimming Cmd. Interior Lighting Percent 2%
Ctsy. Lamp Actv. Reason Interior Lighting Off/Panic/Manual/Air Bag/Door Open/RFA/RFA Theft/Door Closed/Exit/Manual Defeat Off
Dimming Control Reference Interior Lighting Volts Approximately 3.0 Volts
Dimming Control Signal Interior Lighting Percent Varies 9% - 100%
Dimming Control Signal Interior Lighting Volts Varies 0.23 - 3.0 Volts
DRL Relay Command Exterior Lighting Off/On Off
Flash to Pass Switch Exterior Lighting Inactive/Active Inactive
Front Fog Lamp Relay Command Exterior Lighting Off/On Off
Front Fog Lamp Switch Exterior Lighting Inactive/Active Inactive
Hazard Lamp Switch Exterior Lighting Inactive/Active Inactive
Headlamp Switch Exterior Lighting Inactive/Active Inactive
High Beam Relay Command Exterior Lighting Off/On Off
High Beam Select Switch Exterior Lighting Inactive/Active Inactive
Incandescent Dimming PWM Cmd. Interior Lighting Percent 0%
LED Dimming PWM Cmd. Interior Lighting Percent 0%
Left Turn Signal Switch Exterior Lighting Inactive/Active Inactive
LF Turn Signal Exterior Lighting Off/On Off
LR Turn Signal Exterior Lighting Off/On Off
Low Beam Relay Command Exterior Lighting Off/On Off
Park Brake Switch Inputs Released/Applied Released
Park Lamp Relay Cmd. Exterior Lighting Off/On Off
Park Lamp Switch Exterior Lighting Inactive/Active Inactive
Right Turn Signal Switch Exterior Lighting Inactive/Active Inactive
RF Turn Signal Exterior Lighting Off/On Off
RR Turn Signal Exterior Lighting Off/On Off
Stop Lamp Sw. Status Exterior Lighting Counts 1023 Counts
Stop Lamp Relay Command Exterior Lighting Off/On Off
Driver Door Switch

Scan Tool Parameter Data Display Units Displayed Typical Data Value
Operating Conditions: Ignition in the ON position, bright light applied to the ambient light sensor, park brake not set, headlamp switch in the OFF position, dome lamp switch in the OFF position, fog lamp switch in the OFF position, and all doors closed.
Driver Door Open Sw. Inputs Inactive/Active Inactive
Memory Switch Backlight Outputs Percent 0%
Window Switch Backlight Outputs Percent 0%
Export Body Control Module (XBCM)

Scan Tool Parameter Data Display Units Displayed Typical Data Value
Operating Conditions: Ignition in the ON position, bright light applied to the ambient light sensor, park brake not set, headlamp switch in the OFF position, dome lamp switch in the OFF position, fog lamp switch in the OFF position, all doors closed, and trailer harness disconnected.
Battery Voltage Data Display Volts Varies
Rear Fog Lamp Relay Cmd. Data Display Off/On Off
Rear Fog Lamp Switch Data Display Inactive/Active Inactive
Trailer Left Bulb Out Signal Data Display Counts 0 Counts
Trailer Right Bulb Out Signal Data Display Counts 0 Counts
Trailer Detection Input Data Display Off/On Off
Trailer Fog Lamp Relay Cmd. Data Display Off/On Off
Passenger Door Switch

Scan Tool Parameter Data Display Units Displayed Typical Data Value
Operating Conditions: Ignition in the ON position, bright light applied to the ambient light sensor, park brake not set, headlamp switch in the OFF position, dome lamp switch in the OFF position, fog lamp switch in the OFF position, and all doors closed.
Memory Switch Backlight Outputs Percent 0%
Passenger Door Open Sw. Inputs Inactive/Active Inactive
Window Switch Backlight Outputs Percent 0%