Test Description
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The number below refers to the step number on the diagnostic table.
- 2: This step tests if the IPC is able to illuminate the stability system caution indicator during the bulb check.
Stability System Caution Indicator Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 |
|
Go to Diagnostic Aids | Go to Step 3 |
| 3 | Replace the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement (without RPO SLT)
or Instrument Cluster Replacement (with RPO SLT)
. Did you complete the replacement? |
Go to Step 4 | - |
| 4 |
|
System OK | Go to Step 3 |