Steering Wheel Control Switch Assembly Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Steering Wheel Control Switch Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Caution . Preliminary Procedure Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove the steering wheel. Refer to Steering Wheel Replacement . Remove the horn switch. Refer to Horn Switch Replacement .
1	Steering Wheel Trim Cover (Qty: 2) Tip: Remove the 4 horn contact screws.
2	Steering Wheel Control Switch Assembly Screw (Qty: 4) Tip: Quantity may vary with vehicle options. DO NOT over tighten the steering wheel control switch screws or damage to the switch(s) or steering wheel covers may occur.
3	Steering Wheel Control Switch Assembly (Qty: 2) Tip: Quantity may vary with vehicle options. Make sure the steering wheel control switch(s) are properly seated to the steering wheel shroud during installation.