Auxiliary Blower Control Module Replacement

Fig 1: Locating Auxiliary Blower Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the right rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter - Right (Extended Wheelbase) or Trim Panel Replacement - Rear Quarter - Right (Standard Wheelbase) . Disconnect the blower motor control module electrical connector.
1	Screw, Blower Motor Resistor (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 1.5 N.m (13 lb in)
2	Module, Blower Motor Control

Callout

Component Name

Preliminary Procedure

Screw, Blower Motor Resistor (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 1.5 N.m (13 lb in)

Module, Blower Motor Control