LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Battery Current Sensor
    GM1475086Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LY7 - LHD)  or Battery Negative Cable Replacement (LY7 - RHD)  or Battery Negative Cable Replacement (LH2 - LHD)  or Battery Negative Cable Replacement (LH2 - RHD) .
  2. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  3. Squeeze the negative battery cable branches together.
    4. IMPORTANT: Note the position of the battery current sensor prior to removal.
  4. Slide the battery current sensor (1) off of the negative battery cable.
scientia non olet · About LEMON Manuals