Scan Tool Output Controls
The Scan Tool Output Controls for the following control modules is located in the Special Functions section of the Scan Tool Menu.
Driver Door Module (DDM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Special Functions | Door Switch Backlight | When On is selected, the DDM turns the backlighting on the switches on the drivers door ON. |
| Special Functions | Driver Window Motor | When Up is selected, the DDM commands the driver door window motor in the Up direction for approximately 5 seconds. When Down is selected, the DDM commands the driver door window motor in the Down direction for approximately 5 seconds. |
Left Rear Door Module (LRDM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Special Functions | Door Switch Backlight | When On is selected, the LRDM turns the backlighting on the switches on the left rear door ON. |
| Special Functions | Window Up/Down | When Up is selected, the LRDM commands the driver door window motor in the Up direction for approximately 5 seconds. When Down is selected, the LRDM commands the driver door window motor in the Down direction for approximately 5 seconds. |
Passenger Door Module (PDM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Special Functions | Door Switch Backlight | When On is selected, the PDM turns the backlighting on the switches on the passenger door ON. |
| Special Functions | Front Psgr. Window Motor | When Up is selected, the PDM commands the passenger door window motor in the Up direction for approximately 5 seconds. When Down is selected, the PDM commands the passenger door window motor in the Down direction for approximately 5 seconds. |
Rear Integration Module (RIM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
| Rear Defog Status | Lighting Systems/Special Functions | The rear integration module (RIM) actuates the REAR DEFOG relay for 5 seconds after you select ON. The rear window defogger should be active for 5 seconds. |
Right Rear Door Module (RRDM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Special Functions | Door Switch Backlight | When On is selected, the RRDM turns the backlighting on the switches on the right rear door ON. |
| Special Functions | Window Up/Down | When Up is selected, the RRDM commands the right rear door window motor in the Up direction for approximately 5 seconds. When Down is selected, the RRDM commands the right rear door window motor in the Down direction for approximately 5 seconds. |