Diagnostic Aids
WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
If the DTC was set after EBCM replacement, verify that the replacement EBCM and software are correct for the vehicle.
DTC C0551
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: ABS Schematics | |||
| 1 | Did you perform the Diagnostic System Check - ABS? | Go to Step 2 | Go to Diagnostic System Check - ABS |
| 2 | Is the EBCM the correct module for the vehicle? | Go to Step 4 | Go to Step 3 |
| 3 | Replace the EBCM. Refer to Electronic Brake Control Module Replacement (CTS) or Electronic Brake Control Module Replacement (CTS-V) . Did you complete the repair? |
Go to Step 5 | Go to Step 4 |
| 4 | Reprogram the EBCM. Refer to Service Programming System (SPS)
in Programming. Did you complete the repair? |
Go to Step 5 | - |
| 5 |
|
Go to Step 2 | System OK |