Diagnostic Indicator Pattern 1
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Enter the diagnostic mode. Refer to Diagnostic Trouble Code (DTC) Displaying . Verify that the Diagnostic Indicator Pattern 1 is displayed as shown in the diagnostic indicator list.
- If the Diagnostic Indicator Pattern 1 does not display after entering the diagnostic mode, test the signal circuit terminal 16 for a short to voltage or an open/high resistance. If the circuit tests normal, test or replace the rear object sensor control module.
- Proceed to the next Diagnostic Indicator Pattern displayed.