Test Description
The numbers below refer to the step numbers on the diagnostic table.
- 3: The remote start enable procedure is contained in the Keyless Entry Description and Operation.
- 4: The RVS Disable History parameters display the causes of up to eight failed or aborted remote start attempts.
Remote Vehicle Start Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Starting and Charging Schematics
, Remote Function Schematics Connector End View Reference: Engine Electrical Connector End Views , Remote Function Connector End Views DEFINITION: The remote vehicle start function does not operate. |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Press the lock button on the remote keyless entry fob. Do the vehicle doors lock? |
Go to Step 3 | Go to Keyless Entry System Inoperative (Active) or Keyless Entry System Inoperative (Passive) |
| 3 |
|
Go to Step 4 | Go to Keyless Entry System Description and Operation |
| 4 |
|
Go to Engine Cranks but Does Not Run for the 3.6L (LY7) engine, Engine Cranks but Does Not Run for the 4.6L (LH2) engine or Engine Cranks but Does Not Run for the 4.4L (LC3) engine | Go to Step 5 |
| 5 | Observe the Alarm Trigger menu in the RIM data list. Does the scan tool indicate any alarm triggers? |
Go to Symptoms - Theft Deterrent | Go to Diagnostic Aids |