Circuit/System Testing
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X3 harness connector at the HVAC control module.
- Verify with a scan tool that DTC B2625 00 does not set as current.
- If DTC B2625 00 sets as current, test the indicator dimming control circuit for a short to ground. If the circuit tests normal, replace the BCM.
- Ignition OFF, reconnect the X3 harness connector at the HVAC control module and verify with a scan tool that DTC B2625 00 does not set as current.
- If DTC B2625 00 sets as current, replace the HVAC control module.
- If all circuits test normal, replace the BCM.