Circuit/System Description

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Steering angle centering is the process which calibrates the steer sensor output so that it reads 0 when the steering wheel is centered, using data from the yaw rate sensor, lateral accelerometer and wheel speeds. Under normal circumstances steer angle centering occurs after approximately 10 seconds of driving in a straight line on a fairly level surface (i.e. a typical road) at > 10 KPH.

The usable output voltage range for the yaw rate sensor signal and lateral accelerometer sensor signal is 0.25-4.75 volts. The scan tool will report zero lateral acceleration or yaw rate as 2.5 volts with no sensor bias present. The sensor bias compensates for sensor mounting alignment errors, electronic signal errors, temperature changes, and manufacturing differences.