Circuit/System Testing
- Ignition OFF, disconnect the inside rear view mirror harness connector.
- Ignition ON, test for less than 9.5 volts at the cellular signal circuit terminal 10.
- If greater than the specified value, repair short to voltage.
- Ignition OFF, test for greater than 1 ohm between the cellular signal circuit terminal 10 and ground.
- If less than specified value, repair short to ground.
- Disconnect C3 VCIM harness connector.
- Test for less than 1 ohm of resistance between the inside rear view mirror harness connector terminal 2 and VCIM harness connector terminal 10.
- If greater than the specified value, repair open/high resistance.
- Test for less than 1 ohm of resistance between the inside rear view mirror harness connector terminal 10 and VCIM harness connector terminal 9.
- If greater than the specified value, repair open/high resistance.
- If all circuits test normal, test or replace the inside rear view mirror.