Circuit/System Verification
- If DTCs P0101, P0106, P0120, P012B, and P0220 are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle for further diagnosis.
- Ignition ON, observe the scan tool BARO, MAP, and the SC Inlet Pressure sensor parameters. The readings should be within the range specified for your altitude. Determine the altitude at your current location and refer to Altitude Versus Barometric Pressure .
- Engine running, observe the DTC information with a scan tool. DTCs P0068 or P0121 should not set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.