Installation Procedure
WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the yaw rate sensor/lateral accelerometer sensor electrical connector.
- Install the yaw rate sensor/lateral accelerometer sensor (2) to the vehicle.
- Install the yaw rate sensor/lateral accelerometer sensor mounting nuts (1) to the mounting studs.
Tighten: Tighten the yaw rate sensor/lateral accelerometer sensor mounting nuts to 9 N.m (80 lb in).
- Install the center console to the vehicle. Refer to Front Floor Console Replacement .
- Perform the System Check-Vehicle. Refer to Diagnostic System Check - Vehicle .
NOTE:
Refer to Fastener Notice
.