Recall Driver Settings

WARNING: This page is about a different car, the 2006 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

To recall driver settings, use the following procedure:

Enter the memory programming mode for your driver settings by following the instructions listed previously under "Entering the Driver Selection Sub-Menu."
From the DRIVER SELECTION sub-menu, turn the tune/select knob to scroll to RECALL DRIVER SETTINGS and press in the knob.
If the vehicle is in PARK (P), one beep will sound and your previously saved driving position will then be recalled.

If the vehicle is not in PARK (P), 3 beeps will sound and your previously saved driving position will not be recalled.

A memory recall can be stopped by pressing any memory seat or mirror position button.

For more information on how your stored driving positions may be recalled when unlocking your vehicle with the keyless access transmitter or when starting your vehicle, refer to Keyless Entry System Description and Operation in Keyless Entry or to Starting System Description and Operation in Engine Electrical.